Technical specifications
ТОЛУ-ADL-12kV
| Parameter name | Parameter value |
|---|---|
| Highest voltage for equipment, Um [kV] | 12 |
| Rated primary current, Inp [A] | 5, 10, 15, 20, 25, 30, 40, 50, 75, 100, 150, 200, 300, 400, 500, 600, 750, 800, 1000, 1200, 1500, 2000 |
| Rated secondary current, Isn [A] | 1 or 5 |
| Rated frequency, fn [Hz] | 50 |
| Secondary winding accuracy class for metering | 0,2S | 0,2 | 0,5S | 0,5 | 1 |
| Secondary winding accuracy class for protection | 5P; 10P |
| Rated secondary burden at cos φ = 0,8 - metering winding [VA] | 5; 10; 15; 20; 30 |
| Rated secondary burden at cos φ = 0,8 - protection winding [VA] | 5; 10; 15; 20; 30 |
| Instrument security factor, FS | FS5 or FS10 |
| Accuracy limit factor, ALF | 5; 10; 15; 20; 30 |
| Number of secondary windings | 1, 2, 3, 4 |
| Power-frequency test voltage [kV] | 42 |
| Lightning impulse test voltage [kV] | 75 |
| Rated insulation level according to DSTU EN 61869-2 [kV] | 12/28/75 |
| Climatic configuration and installation category according to GOST 15150 | УХЛ2 |
| Maximum installation altitude above sea level [m] | 1000 |
| Installation type | Indoor installation |
| Construction | Cast epoxy insulation that does not support combustion |
| Maximum weight [kg] | 25 |
| Minimum average service life [years] | 40 |
| Switchable transformation ratio option | On request |
| Compliance with standards | DSTU EN 61869-2:2017 Instrument transformers. Part 2. Additional requirements for current transformers. |